Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Trusted Garage Door Parts for Richardson Homeowners
A snapped torsion spring or a frayed cable doesn’t wait for a convenient time, and in Richardson’s heat, metal fatigue shows up sooner than it does in cooler climates. Servo Garage Doors has repaired and replaced Garage Door Parts in Richardson since 2015, with more than 18,000 jobs completed and every single one backed by a written price before work started. When a spring breaks on a Saturday morning in Canyon Creek or a roller seizes in Heights Park, we answer the phone with a real person and dispatch a background-checked technician who carries the common parts on the truck. Call (972) 980-5944 and you’ll know the price before we turn a wrench.
What Our Garage Door Parts Service Includes
Garage door parts fail in predictable ways, and Richardson’s temperature swings accelerate some of them. If you’re nearby, we also offer our Garage Door Parts in Plano. Here is what we replace most often, what each part does, and what you can expect from us on the job.
Torsion Spring
The torsion spring is the tightly wound coil mounted above the door that carries almost the entire weight of the door every time it opens and closes. When it breaks, the door will not lift, or it will drop hard if the opener tries. We measure the wire diameter, inside diameter, and length to match the correct spring for your door’s weight, and we quote the replacement at $180 to $340 before touching anything. Clause 4 of The Haven Standard means the technician photographs the failed spring, shows it to you, and only then quotes the replacement.

Extension Spring
Extension springs hang along the horizontal tracks on older doors and stretch to counterbalance the door’s weight. They fail differently than torsion springs: they stretch out over time, lose tension, and the door gets heavy or sits crooked. We replace both springs at once as standard practice, because a mismatched pair causes uneven wear that breaks cables. The photo record includes both the removed springs and the new ones in place before we call the job done.

Cables & Drums
Cables wind around the drums at each end of the torsion bar and transfer the spring’s force to the door. A frayed cable is a genuine hazard because it’s holding stored tension, and when it lets go, the door can drop. We inspect cables for broken strands and corrosion at every visit, and we replace them with the correct diameter and length for your door. Cable replacement runs $130 to $250, and we recommend inspecting the drums at the same time since worn drums chew through new cables.

Rollers & Hinges
Rollers are the small wheels that ride inside the vertical and horizontal tracks, and hinges connect the door panels and let the door bend around the curve. Nylon rollers wear down and get noisy, and bent hinges make the door bind or scrape. We replace rollers in sets so the door rides evenly, and we check every hinge for play while the door is under load. The price for roller replacement is $110 to $220 depending on how many and what type your door takes.

Weatherstripping
Weatherstripping is the flexible strip nailed or stapled to the outside frame where the door meets the jamb, and it’s what keeps Richardson’s hot air and dirt from blowing into the garage. It dries out, cracks, and pulls away from the frame within a few years here. We carry multiple profiles on the truck so the replacement matches your door’s gap instead of leaving a ridge or a gap. It’s a lower-cost part, but cutting it correctly and fastening it to survive July heat is a detail we don’t rush.

Bottom Seal
The bottom seal is the rubber or vinyl strip that runs along the bottom edge of the door and keeps water, leaves, and rodents out. Over years in a Richardson driveway, it flattens, tears at the ends, and stops meeting the concrete. We slide out the old seal, clear the track it rides in, and install a new one cut to your door’s exact width. It’s a small part that makes a big difference when the garage floods during a spring downpour.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Parts

We stock and install OEM parts for LiftMaster and Chamberlain, the two opener and accessory brands we see most often in Richardson garages. LiftMaster’s logic boards, safety sensors, and gear kits fail in patterns we recognize on sight, and we carry the common replacements so a repair doesn’t turn into a two-visit job. Chamberlain hardware shares a lot of DNA with LiftMaster, and we can usually identify the part from the model number on the opener head before the technician even arrives.
Raynor and Genie doors and openers also come through our truck regularly. Raynor doors have their own hinge and track profiles, and we keep the common rollers and hinges that fit them so we’re not waiting on a distributor. Genie openers have their own quirks with wall consoles and circuit boards, and we’ve sourced enough of their parts to know which failures are repairable and which are not. Whether you have one of those four brands or something else entirely, we can get the part and show you the price before the work starts. We also stock Garage Door Parts - Garland residents rely on.
Before
AfterSigns You Need Garage Door Parts Right Now
- The door is heavy and difficult to lift by hand. If you pull the release handle and the door feels like dead weight, a spring has lost tension or broken. Running the opener against a failed spring will burn out the motor and bend the top panel, so stop using the door and call us at (972) 980-5944.
- The door shakes, jerks, or shudders while moving. That kind of motion is almost always a worn roller, a bent hinge, or a cable drum that’s slipping. It gets worse fast because each cycle compounds the damage, and a door that comes off its track is a much bigger repair.
- You hear grinding, squealing, or a sharp bang from the spring area. A sharp noise that sounds like a firecracker from inside the garage usually means a torsion spring let go. Grinding from the opener head means a gear or sprocket is stripping. Both are parts failures with specific fixes, and both are cheaper to fix now than after the door stops entirely.
- The door sits crooked or one side is higher than the other. Uneven doors point to a cable issue, a spring that’s weakened on one side, or a track that’s come out of alignment. The longer it runs like that, the more wear spreads through the hinges and rollers on the loaded side.
- You can see daylight or feel air around the door edges or under the bottom. That’s weatherstripping or a bottom seal that’s gone. In Richardson’s summers, a gap under the door is an air-conditioning leak and an open invitation to insects and rodents, not just a cosmetic issue.
Our Garage Door Parts Process - Step by Step

We do not show up, disappear into the garage, and hand you an invoice. Here is exactly how a parts call works with us.
- 1
You call, a person answers. When you call (972) 980-5944, you talk to a live dispatcher, not a phone tree. You describe the symptom in your own words, we tell you when a technician will arrive, and you get a text with the technician’s name before they pull up. Emergency calls happen the same day, including weekends and holidays.
- 2
The technician inspects and photographs the failed part. This is Clause 4 of The Haven Standard, and it is the reason Marcus Deller founded the company this way. The technician finds the failed component, photographs it, and puts that photo in your hand or on a tablet screen. You see the break, the wear, or the corrosion before anyone discusses a replacement.
- 3
You get a flat, written price and a written scope. Clause 1 of The Haven Standard means the price you see is the price you pay, before any work starts. The written scope says exactly which parts get replaced, what brand they are, and what the labor includes. There is no vague “parts and labor” line with a surprise underneath it.
- 4
We do the work, and we show you the finished result. After the parts are in, we cycle the door, check the balance, lube the moving parts, and photograph the new components in place. We run the door through several open and close cycles with you watching, so you’re not left wondering if the problem is actually solved.
- 5
You get a documented photo record before we leave. Every visit closes with a photo record showing what we found and what we did, tied to the written price and scope. That record is yours to keep, and it’s what makes the 365-Day Done Right Promise enforceable: if something isn’t right within a year, we make it right.
How Much Does Garage Door Parts Cost in Richardson?
A torsion spring replacement in Richardson typically runs $180 to $340, and roller replacement falls between $110 and $220 depending on how many rollers your door has. Cables run $130 to $250, and weatherstripping with a new bottom seal usually lands at the lower end of the parts pricing scale. These are the actual ranges we quote in this market, and you will get the exact flat price for your door before any work starts, not after.
What moves the price: the door’s weight and size determine the spring and cable spec, the number of rollers changes that line item, and the brand of parts you choose matters. OEM parts from LiftMaster or Raynor cost more than generic equivalents, and we’ll show you the difference on the written quote so you decide. We carry Carrollton Garage Door Parts as well for customers in that area. The way to avoid overpaying is to get the price before the work begins and to see the failed part with your own eyes, both of which are built into how we work. Every estimate is free, and a second opinion on another company’s written quote is also free: bring us the paperwork and we’ll tell you whether we’d do the same work for less.
Garage Door Parts Near Richardson - Our Service Area

Servo Garage Doors covers Richardson and the surrounding metro, including Garland, Plano, Allen, Carrollton, and Wylie. We keep our technicians routed so that most non-emergency parts calls in Richardson are same-day or next-day. If you’re in a nearby city and your door is down, call (972) 980-5944 and we’ll give you an honest arrival window, not a vague “sometime between noon and five.” Many of our clients find us for Garage Door Parts in Plano and Garage Door Parts in Garland when their search crosses city lines.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Parts in Richardson

Garage door parts service is the inspection, replacement, and adjustment of the specific components that make a garage door open, close, and seal: torsion springs, extension springs, cables, drums, rollers, hinges, weatherstripping, and bottom seals. In Richardson, parts service is what fixes a door that’s heavy, noisy, crooked, or letting outside air in without replacing the whole door. Servo Garage Doors replaces individual parts and shows you the failed component before quoting the repair.
Most parts replacements, including torsion springs, cables, and rollers, take 45 minutes to two hours on site. If we need a part we don’t carry, which is rare, we tell you before we leave and schedule the return visit inside a day or two. Same-day service is available for most Richardson calls, and emergency spring or cable repairs happen the day you call.
In Richardson, torsion spring replacement runs $180 to $340, cable replacement costs $130 to $250, roller replacement runs $110 to $220, and weatherstripping with a bottom seal is typically under $150. Every job gets a flat, written price before any work starts, per Clause 1 of The Haven Standard. Call (972) 980-5944 for an exact quote - estimates are free and there’s no obligation.
Yes, we service LiftMaster and Chamberlain openers every week in Richardson, and we stock the common OEM logic boards, gears, sensors, and remotes for both brands. We can diagnose most LiftMaster failures from the symptoms you describe on the phone, and we confirm with the model number on the opener head. The parts price is on your written quote before we begin.
Yes, broken springs and snapped cables are same-day priority calls for us in Richardson. Call (972) 980-5944 and a live person will give you a dispatch window and the technician’s name. We answer emergency calls 24 hours a day, seven days a week, because a garage door that won’t close is also a security issue.
Every parts replacement is covered by our 365-Day Done Right Promise: if it’s not right within a year, we make it right, with the work backed by the written scope and photo record from your visit. Manufacturer warranties on springs, cables, and other parts vary by brand, and we register them for you where that applies. You’ll see the warranty terms on the written scope before work starts.
Clear the area directly under the door and inside the garage near the tracks, and secure pets so our technician can work safely. If you have a photo or video of the door misbehaving, that helps us identify the part before we even arrive. Then watch for a text with your technician’s name and arrival time, which goes out when we dispatch.
Schedule Your Garage Door Parts Service in Richardson Today
A broken spring, a shredded cable, or a door that’s riding rough is a problem with a specific fix and a known price. Call (972) 980-5944 now and we’ll schedule your visit, quote you a flat written price before anything gets touched, and leave you with the photo record that shows exactly what we did. Free estimates, a real person on the phone, and a one-year promise that stands on paper, not a handshake.
Written by Marcus Deller, Owner at Servo Garage Doors, serving Richardson since 2015.






Before
After
Before
After